Post rammer

More
6 years 4 months ago - 6 years 4 months ago #536926 by jamesgeorge
Post rammer was created by jamesgeorge
Finally managed to go pick up the post rammer i had purchased.

Just need to plumb it into the hydraulic system and its all go.

Just wondering if anyone knows why there is three lines in\out of the valve bank?
Attachments:
Last edit: 6 years 4 months ago by jamesgeorge.

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #536930 by Stikkibeek
Replied by Stikkibeek on topic Post rammer
Maybe lift, release and angle for travelling. ?

Did you know, that what you thought I said, was not what I meant :S

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #536936 by Rokker
Replied by Rokker on topic Post rammer

jamesgeorge wrote: Just wondering if anyone knows why there is three lines in\out of the valve bank?

Only three? !!

Do NOT cross this paddock! ... Unless you can do it in 9 seconds, 'cos the bull can do it in 10!

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #536955 by powerguy
Replied by powerguy on topic Post rammer
A bit hard to see from the pictures but I see there is no PTO shaft so my guess is you would have one for raise/lower the monkey, one for fore/aft leveling and maybe one for traverse leveling?

Renewable power systems - hydro, wind and solar.
Grid tie and off grid (stand alone)
www.poweron.kiwi.nz

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago - 6 years 4 months ago #536956 by Rokker
Replied by Rokker on topic Post rammer
From the photo it looks like you have 4 valves/levers, not 3. Often there are those Powerguy mentioned plus one for sideways shifting to bring the foot to the fenceline.

Do NOT cross this paddock! ... Unless you can do it in 9 seconds, 'cos the bull can do it in 10!
Last edit: 6 years 4 months ago by Rokker.

Please Log in or Create an account to join the conversation.

Time to create page: 0.120 seconds