Incubator turner motor needed

More
9 years 7 months ago #33354 by spoook
Black Chick 12 incubator.
Help, eggs in the incubator, turner motor has packed up.
We took it apart and one of the nylon gears have a couple of stripped cogs. [:I] Tried to file but it did not work, once it got to the stripped tooth it stopped. It was like watching paint dry waiting for it to get round.
I have been turning the eggs by hand. :(

Anyone know of anywhere that may have a variety of small nylon cogs?
There may just be one the same size.

There are no bad questions only those that are not asked.
"You are responsible, forever, for what you have tamed"

Please Log in or Create an account to join the conversation.

More
9 years 7 months ago #443317 by jimminette
Hey my good broodie would love to sit on some eggs. I've been too busy lately to put her in a cool off cage Do you want to borrow her? I'm heading past your way in the morning and I could drop her off.

Please Log in or Create an account to join the conversation.

More
9 years 7 months ago #443342 by spoook
Thanks for the offer, these are quail eggs. Probably a bit fragile for a broody.[;)]

We have not forgotten TK, just have to get the guys organised [;)]

There are no bad questions only those that are not asked.
"You are responsible, forever, for what you have tamed"

Please Log in or Create an account to join the conversation.

More
9 years 7 months ago #443355 by griev
Replied by griev on topic Incubator turner motor needed
Hi Spook try a model shop as in one that sell remote control cars etc

there would be one online I am sure as they have cogs and gears of all sizes

Jaycar also do - they have an online catalogue that may help

Cheers Shane

Let the sun shine on my solar panels[:)]

Please Log in or Create an account to join the conversation.

More
9 years 7 months ago #443380 by sarniagirl
Ive got a small broody silkie...shes hatched quails before infact i was going to try that again and see if you had any.Call me if you want.

Please Log in or Create an account to join the conversation.

Time to create page: 0.251 seconds