Ideas how to make a display rack

More
10 years 10 months ago #28487 by kai
Sorry for vague title, not sure how to phrase it better.

I need to make something that I can hang packets of seeds on. The packets will have a whole punched through the top, so will hang rather than stand in a rack.
I have a lot of stuff in the shed, tools, potential materials etc, but I am at a loss as to a design.

It does not have to be perfect, but has to be good enough to display in a local shop

Any ideas

Please Log in or Create an account to join the conversation.

More
10 years 9 months ago #389359 by ronnie
When I was selling packets of buttons, I made a board to hang them on. It was just a piece of MDF I had laying around. I just put small nails into it at the spaces and rows required. Left about a haf inch of the nail standing and hung the packets on that. I used nails that had a bit of a head on them so the packets didn't fall off. I also made a base for it so the whole thing was free standing.
I am sure you could paint it nicely so it looked good in the shop.

Please Log in or Create an account to join the conversation.

More
10 years 9 months ago #389490 by kai
that is not a bad idea ronnie, pretty simple, I have some rather long nails which would do the job. I think some nice sanded wood would look best - the natural look.

Please Log in or Create an account to join the conversation.

Time to create page: 0.191 seconds